Page 550 - Tromart Awards 2020 Catalog

2020 Components Catalog Sign Supplies
TO BUILD A
CUT VINYL
PART NUMBER
The first four (4) digits
in our part number identify
the series of product.
(These four digit numbers can be located at the top of the info charts within each series. They may not always be the same as the series number. Refer to the chart for each series to ensure you have the correct number.)
The second four (4) digits
identify the material converted size.
The first two digits indicate the width
and the last two digits indicate the length. Note: For 1 yard material
use 01 in the last two digits to indicate the length.
Note: See chart below for width and length codes.
The final three (3) digits
identify the color, and all colors contain three digits.
Notes:
Standard punch is slot pattern. IBM and 3-hole punch patterns are available. Except for 3M Reflective Series which is Gerber punched.
* Heat Transfer Only ** Select Materials
When ordering punched product
refer to the notes for each series to identify the correct number to order. These will be the first (4) digits of your part number for punched product.
4200 - 1515 - 014
Unpunched 2.8 mil Calendered
Width = 15"
Length = 150' (50 yds) (The 0 in 150 is hidden)
Color 014 (Tomato Red)
4250 - 3003 - 003
Punched
2.8 mil Calendered
Unpunched 2.0 mil Cast
Width = 30"
Length = 30' (10 yds) (The 0 in 30 is hidden)
Color 003 (Gloss Black)
1 yard example
2100 - 2401 - 001
Width = 24"
Length = 3' (1 yard)
Color 001 (Red)
(cut vinyl only)
Width and Length
Part number codes for the second four (4) digits
Width
1 yard
5 yard*
10 yard
25 yard**
50 yard
15"
1501
1502
1503
1508
1515
24"
2401
2402
2403
2408
2415
30"
3001
3002
3003
3008
3015
48"
4801
4802
4803
4808
4815
• Prices subject to change by manufacturer •
for pricing log on to tromartawards.com
550
HOW
Sign Supplies